MARIN Alpine Trail 7 - 29"

The Alpine Trail is a 29” wheeled full suspension bike built for the all day enduro rider that earns their downhill fun.

SUSPENSION SETUP:

• REAR SHOCK SETUP

Recommended Sag = 30%/19.5mm

• Step 1: Set correct pressure in rear shock.
• Step 2: Sit on the bike and cycle the suspension (*with correct riding gear).
• Step 3: Reset O-ring and sit on the bike, DO NOT BOUNCE, carefully step off.
• Step 4: Measure sag (from o-ring to seal of shock), If it does not match the bike’s recommended sag in millimeters repeat process.
• Step 5: Adjust rebound setting to ensure proper control.

FORK SETUP:

Marin recommends that all bikes front and rear suspension feel balanced

• Step 1: After rear sag is set follow the recommended pressure from the fork manufacture.
• Step 2: Bounce evenly up and down on the bike, cycling the suspension up and down to make sure both front and rear suspension feel balanced, if the front does not match the rear add or release pressure.
• Step 3: Once the bike feels balanced adjust the rebound damping to ensure proper control.